Window replacement Hayward

New windows in Hayward, where house age and tract maps decide the review

Hayward asks for a building permit to replace or add any window, sliding glass door or skylight; new glass in a sash and frame that stay put is the exception. The city's handout also tells contractors to check with Planning first on a building at least 50 years old or in a historic district, though the Historic Preservation Ordinance exempts houses built under a tentative tract map after 1946. A retrofit unit keeps the original operating type.

How a request goes

  1. Describe the window replacement job

    A line or two is enough. A photo helps a pro quote without a first visit.

  2. Local pros reply

    Up to five who take window replacement work in Hayward call or text you back.

  3. You choose

    Agree scope and price with the pro you pick. Requesting is free, with no obligation to hire.

Permit covers
Windows, sliding glass doors and skylights; glass alone is exempt
Historic check
50+ years or in a historic district; post-1946 tract houses exempt
Energy Code limits
Climate zone 3: U-0.27, no SHGC cap; U-0.40 at 75 sq ft or less
Rental units
Inspected under the Residential Rental Inspection Program since 1989
Hayward City Hall
Hayward City Hall. Photo: Mercurywoodrose, CC BY-SA 3.0, via Wikimedia Commons.

Neighbourhood by neighbourhood

Hayward neighborhoods that change the window paperwork

  1. Upper B Street and Prospect Hill

    Program LU-14 names both as candidates for National Park Service historic districts. On an older house here, the handout's advice carries real weight: ask the Planning Division whether historic protections reach the project before applying, since the ordinance makes it unlawful to alter character-defining features without a historical alteration permit, and original window design can be one of those features.

  2. Mt. Eden

    Mt. Eden was a farming township of its own until most of it was annexed by Hayward in the late 1950s, and pre-tract houses still stand among the subdivisions, like the 1918-1922 house at 24765 Hesperian Boulevard evaluated for the city. A house of that kind falls outside the tract-map exemption, so its age alone can send a window permit through historic review.

  3. The hills east of Mission Boulevard

    Since January 1, 2026, Hayward's wildfire-code amendment has treated the land east of Mission Boulevard, from D Street south to Union City, as its Wildland-Urban Interface Fire Area, where development is built to the 2025 state wildfire code. Before ordering units for a house there, ask the Building Division whether replacement glazing is held to that code too.

Free, no obligation. Next, add your details in the request form.

The work

What the Hayward handout asks of each kind of window job

  • Cracked glass in a frame that stays

    Broken glass can be repaired without a permit in a window, a sliding glass door or a skylight, as long as the existing sash and frame stay in place. Replace the sash, the frame or the whole unit, or cut a new opening, and the handout calls for a building permit. The fee is set by valuation, meaning the fair market cost of labor and materials together, so the city asks for an accurate figure when the application goes in.

  • A retrofit unit inside the old frame

    Hayward defines a retrofit window as one that replaces the glazing and the sash while leaving the existing frame. It need not meet the exact egress figures for sill height and openable area, but it must meet the minimum energy code, may not reduce egress capacity, and has to keep the original format: a slider cannot come back as a fixed pane. Every window job files the state's CF-1R-ALT certificate of compliance.

  • A bedroom window that has to work as an exit

    A bedroom without a door to the outside needs at least one window with an opening 20 inches wide and 24 inches high, its sill no more than 44 inches above the floor, and 5 square feet of clear opening on the first floor or 5.7 above it. The handout's own worked example: a 20-inch casement 24 inches tall opens only 3.3 square feet and fails, while on the first floor a 36-inch height would pass.

  • Bars over a bedroom window

    Security bars may cover a bedroom egress window only if they open from the inside without effort or special knowledge. Putting them on such a window also triggers smoke detectors in every bedroom and in the hallways leading to bedrooms, where those are missing. For rentals, the city's self-certification checklist asks the same thing in plainer words: bars correctly installed, with the required quick-release mechanisms.

  • A sliding glass door where there was none

    A new slider in a fresh opening may need a landing outside it, as wide as the door and at least 3 feet deep in the direction of travel. The step down from the house to that landing may not exceed 7 3/4 inches, and steps off it need a run of at least 10 inches. Glass within 2 feet of a door, within 18 inches of a walking surface or in a stairway has to be tempered.

Free request

Describe the window replacement job once. Local pros who take work in Hayward reply by call or text.

  • No fee to request, and no obligation to hire
  • You agree scope and price with the pro you choose
  • Photos help them quote without a first visit

Get quotes for window replacement work in Hayward

Two short steps. A local pro who takes this work calls or texts you back.

To send a request, call or text (415) 449-8213.

Free to request, and you agree the scope and price with the person you hire before work starts. In California, a job over $1,000 in labor and materials, or one that needs a building permit, must be done by a contractor licensed by the CSLB in the right class. Ask for the license number and check it at cslb.ca.gov.

Tall arched double windows with divided panes in a white paneled room
Tall arched double windows with divided panes in a white paneled room. Photo: WesselArtPublic, CC BY-SA 4.0, via Wikimedia Commons.

The houses here

Farmhouses, pre-war blocks and the tracts laid out around them

Hayward's preservation ordinance splits the housing stock along two lines. Its review reaches structures at least 50 years old, an age the city's post-war subdivisions have long passed, but it exempts residential property developed under a tentative tract map after 1946. That leaves the older houses inside it: the blocks near downtown, and farmhouses the tracts grew up around. A historic resource evaluation filed with the city for 24765 Hesperian Boulevard describes one, built between 1918 and 1922 in the former Township of Mt. Eden, with wood windows of one, four and eight lites beside later one-over-one sliders, its neighbors drawn on a 1954 tract map. On houses like that, the window is a feature the city may want to look at, not only a part to swap.

Permits and local rules

Where Hayward's window requirements come from

  1. Window Replacements handout, revised December 1, 2020

    Development Services requires a building permit for replacing or adding windows, sliding glass doors or skylights. A section on historical preservation warns that window alterations on structures at least 50 years old, or in a historic district, may be subject to the Historic Preservation Ordinance, and recommends that owners and contractors contact the Planning Division before applying. The handout also sets light and ventilation minimums for habitable rooms: glazing of at least 8 percent of the floor area and openable area of 4 percent.

    Source: City of Hayward Development Services (hayward-ca.gov)

  2. Historic Districts Strategy, General Plan program LU-14

    The General Plan directs the city to apply to the State Historic Preservation Office for National Park Service historic districts covering the Upper B Street neighborhood, the B Street Historic Streetcar District, the Prospect Hill neighborhood and the Downtown Historic District, a program running from 2014 to 2040. Under the ordinance, staff first check the Planning Division's survey records; where a building has no review on file, or one more than five years old, the applicant may have to pay for an evaluation by a qualified historic consultant.

    Source: City of Hayward General Plan (hayward-ca.gov)

  3. Residential Rental Inspection Program

    Adopted by the City Council in 1989 and set out in Hayward Municipal Code Sec. 9-5, the program covers all rental housing units, inspected on a tenant's request, an owner's request or the city's periodic schedule. Qualifying owners may self-certify instead, and the checklist for that path lists window items room by room: panes intact and not cracked, proper locking devices, screens in good condition, and egress windows that operate and open completely.

    Source: City of Hayward Code Enforcement (hayward-ca.gov)

State license for this work: C-17 Glazing, B General Building. Look up a contractor's license on the CSLB website (cslb.ca.gov).

Before you hire

Ask these before a Hayward window order is placed

  • Check the C-17 Glazing license at cslb.ca.gov, and confirm the permit application will carry an accurate valuation of labor and materials.
  • For a house 50 or more years old, ask whether it was built under a post-1946 tract map or needs a Planning check first.
  • Ask which windows will go in as retrofits in the old frames, and whether each keeps its original operating type.
  • Ask which openings sit within 2 feet of a door, 18 inches of a walking surface or beside a stair, and get tempered glass there.
  • In a house built before 1978, ask for the firm's EPA lead-safe renovation credentials, because window replacement is always covered by that rule.

Free, no obligation. Next, add your details in the request form.

Questions

What Hayward owners ask about new windows

Our Hayward house was built in 1957. Does a window permit go to Planning for historic review?

Probably not, if it was built as part of a subdivision. The window handout flags buildings 50 or more years old, but the Historic Preservation Ordinance exempts residential property developed under a tentative tract map after 1946. A 1957 house built on its own lot, outside a tract, is a different case: staff check the Planning Division's survey records first and may ask for an evaluation.

Do I need a Hayward permit to replace one cracked pane?

No, as long as only the glass changes. The handout lets broken glass be repaired in a window, sliding glass door or skylight without a permit when the existing sash and frame stay in place. New sashes in the old frame, a full replacement unit or a new opening all need a building permit.

Can a retrofit window in Hayward turn a slider into a fixed pane?

No. Hayward requires a retrofit window to stay in the same format as the original, and its own example is a slider that cannot be replaced with a fixed unit. The retrofit also may not reduce the egress capacity of the opening, and the contractor is expected to avoid shrinking an egress opening as far as possible.

What U-factor do replacement windows need in Hayward?

All four Hayward ZIP codes are in Energy Code climate zone 3. Replacement windows there take a maximum U-factor of 0.27, and the zone has no maximum solar heat gain coefficient. A job replacing 75 square feet of windows or less may use units up to U-0.40, and the heat gain limit that comes with that option does not apply in zone 3. The city asks for the CF-1R-ALT form either way.

I rent out a house in Hayward. What will a city inspector look at on the windows?

The Residential Rental Inspection Program covers every rental unit in the city. Its self-certification checklist shows what a passing unit looks like: windows and panes intact with no cracks, proper locking devices, screens in good condition, bedroom egress windows that open completely, and any bedroom bars fitted with the required quick-release mechanisms. Owners in good standing may self-certify instead of waiting for a periodic inspection.

Where these facts come from

Checked against these public sources in November 2026. Rules and programs change: confirm permit requirements with the city before work starts, and a contractor's license on the CSLB website.

Window replacement work in Hayward? Tell us what you see.

One request reaches local handymen and contractors who take this work. The Handyman SF connects you with them; it does not do the work.

HandymanNow for handymen Work in Hayward? Get job leads by text. Pick your trades and areas, take only the jobs you want. No subscription. Start getting leads HandymanNow for homeowners Get the HandymanNow app. Send a request with photos, message your handyman and follow them on the way. Download the app

HandymanNow app

Fix it faster. Find work faster.

Homeowners send a job with photos and follow their handyman on the map. Handymen get local jobs by text and take only the ones they want.

Call WhatsApp (opens WhatsApp) Free quote